IDS IDS806, Руководство пользователя

Страница: 16 / 32

Owner’s Manual
700-624-01C
16
Medical Alarm
Hold down the key until the beep

If the [M] key is pressed until the keypad beeps (approximately 1 second) a
MEDICAL ALARM condition will be activated.

The keypad's buzzer will sound rapidly for 5 seconds to indicate that a medical
alarm has been initiated.
Duress Code
+ [DURESS CODE]

This special 4 digit user code should only be used in the unique situation where an
intruder forces one to disarm the system "under duress".

When the [DURESS CODE] is entered, the control panel disarms normally -
however a DURESS REPORTING CODE is transmitted to the monitoring company
to inform them that you have been forced to disarm by an intruder.

It is advisable to choose a code that can be easily remembered by all family (or
staff) members.
System Memory
Alarm Memory
The Alarm Memory displays any zones which were violated the last time the system was
armed. If the ARMED indicator is flashing before you disarm the system, a violation has
occurred. To view which zone was violated.
Hold down the key until the beep
1.
Disarm the panel with a valid [User Code], if the system is armed.
2.
Hold down [0] until the keypad buzzer sounds.
5.
The READY indicator will turn off and the keypad buzzer will sound briefly.
6.
Flashing zones indicate which zones were violated during the last armed period.
7.
The memory status will be displayed for five seconds, or until the [#] is pressed.
8.
The alarm memory will be erased the next time the system is armed.
Zone Bypassed Memory
The Zone Bypassed Memory displays any zones which were bypassed during the most
recent arming cycle.
then
1.
Hold down [0] until the keypad buzzer sounds.
2.
The READY indicator will turn off and the keypad buzzer will sound briefly.
3.
Flashing zones indicate which zones were violated during the last armed cycle.
4.
To view any bypassed zones, press the [1] key once and bypassed zones will flash.
5.
The memory status will be displayed for five seconds.