IDS IDS-iSYS, Руководство пользователя

Страница: 83 / 263

3-6-7- Colour codes associated with position contour
The installed product is not or is no longer used in assay.
The product can be removed.
The installed product is scheduled in a list of assays which will be
progressively sent to the analyser.
The relevant assays are not yet taken into account by the analyser: the
programming can still be modified and, if necessary, the product can still be
removed.
A green colour code is displayed on the contour of a position whether the analyser is in pending mode or in
assay mode. During a run cycle, this code indicates that all the tests programmed for the sample are
completed or, when the option is selected in the menu
SETTINGS LOCAL SYSTEM
, that all the samplings
have been performed.
A blue colour code is shown only during a run cycle. The tests associated with this position have been
included in a predictive list of assays. This list is established according to test priority and according to the
order of the sample tray positions. As the tests have not yet been sent to the analyser, the sample
programming can still be modified.
This product can also be removed from the sample compartment. In this case, the predictive list of assays is
modified after excluding the relevant tests.
If this product is reloaded onto the sample compartment, the relevant assays are included at the end of the list
of assays. In this case, a new predictive list is established, following the same criteria. This product will be
processed after all the products with the same priority level, even if the product returned at its original position.
The blue colour code of the contour disappears when the tests are sent to the analyzer, at the moment when
the center of position turns to blue (assays in process).
Use
3-6- L
oading of Calibrators, Controls or Samples in the Sample Compartment (continued)
IDS-iSYS User Manual - Revision M1
Use 3-6
68
Software version V 14