IDS GeoRadar IBIS-ArcSAR, Руководство пользователя

Страница: 54 / 78

Confidential Information - Do Not Distribute
two holes placed at the corner of the bottom side of the laptop. Then
connect all the cables;
Fig. 115 – CF31 with cables connected
5. To supply the Laptop turn on the PC switch on the Control Module.
The Laptop will turn on automatically;
Fig. 116 – PC Switch on Control Module
6. to close the tray, push the drawer inside the compartment and screw
the black knob on the right again (
Fig. 22
). Remember to fasten the
Velcro® belt on the CF31, in order to keep stuck the computer during
ArcSAR moving.
5.18 ArcSAR IP addresses configuration
In case of integration of the ArcSAR devices into the mine network, the IP
addresses have to be configured again.
It is recommended to perform these actions with the assistance of an IBIS
Specialist.
The devices that need to set an IP address are:

Power Supply Controller;

Pointing Camera;

Weather Station internal Data Logger board (if present);

Wi-Fi Radios (if present);

ArcSAR Laptop.
5.18.1 Power Supply Controller IP address
1. Click on Start and run Lantronix → DeviceInstaller as administrator;
2. wait some seconds to let the software visualize all the components
connected. On the main big tab, select the device whose IP has to be
assigned;