Confidential Information - Do Not Distribute
5
FIRST ArcSAR SETUP
Don’t use electric screwdriver while working with IBIS ArcSAR hardware parts.
5.1
Unpacking the wooden boxes
1.
Open the wooden shipped boxes which contains ArcSAR Trailer,
ArcSAR Positioner and ArcSAR Supply Unit;
2.
Take the box placed under the Trailer: it contains some items to
install the Positioner and the Supply Unit on the Trailer. This box
contains:
4 fixing pierced plates for the Supply Unit installation;
(right side)
(left side)
Fig. 41 – Fixing pierced plates
16 screws (M10 x 35 mm hexagonal Head) to fix plate to the
Trailer;
Fig. 42 - M10 x 35 mm hexagonal head screw with M10 washer
32 screws (M10 x 35 mm hexagonal head) to fix plate to the
Supply Unit;
48 M10 washers;
4 screws (M12 x 50 mm hexagonal head) provided with 2
washers and self-blocking nuts;
Fig. 43 - M12 x 50 mm hexagonal head screw with self-blocking nut and washer
3.
Descend the Trailer from the box and brake it using the hand-brake
and the chops.
5.2
Supply Unit on the trailer deck
