65
ejection. When it is completed, the printer ejects the card and brings a new card into the printer
and starts testing.
In the Setting,
“Retry”
is to retry the encoding test when the error occurred.
“Prompt on Error
”
is to display Pop up Message when the error occurred. If not, Error number will be counted
without message. The number of error is displayed at Error section
.
(5) Encoding
Magnetic: Magnet Stripe Encoding
“Read”
is to
read and display the data from magnetic stripe card. It is composed of
“Do Read” and “Read All Buffer” and runs “Do Read” and “Read All Buffer” sequentially.
“Do Read”
is
to read the data from
magnetic stripe card and store the data in the
buffer.
“Read All Buffer”
is
to transmit the date stored in the buffer to PC. If the track number
is ticked, the data of the ticked track is only transmitted to PC.
“Write”
is to write the data to the magnetic stripe. It is composed of
“Write All Buffer”
and “Do Write” and runs “Write All Buffer” and “Do Write” sequentially.
“Write All Buffer”
is
to transmit the data to the buffer.
“Do Write”
is to write the data stored in the buffer to the magnetic stripe of card. You
can choose the magnetic foil type (LoCo or HiCo) and the track of magnetic stripe.
“Random Fill”
is to create a random magnetic encoding data for testing.
Batch process repeats the following steps sequentially,
Card “IN”
Move “Mag”
Magnetic “Random Fill”
Magnetic “Write”
Magnetic “Read”
Card “OUT”
.
Figure 90 Magnetic stripe encoding
