61
Heater Temperature
: It is for laminating temperature.
Laminating PPS
: Laminating speed.
Laminating Move Pulse
: The distance of laminating movement.
Separation with Card
: After laminating and removing film, the value changes the
distance of card movement
Separation with Film
: After laminating and removing film, the value changes the
Distance of film movement.
Lami. Start Card Pos
: The value is for laminating start position.
Torque Laminating Max
: Maximum torque of motor while laminating.
Torque Laminating Min
: Minimum torque of motor while laminating.
Laminating with Pulse
: The value is for change laminating width.
Film Attribution
: It changes film attribution.
⑥
It shows “Advanced Setup” window.
⑦
“Save” or “Load” the values.
Get Config
: Read the values from connected printer.
Set Config. :
Set the values to connected printer.
Load from File :
Load the values from saved file.
Save to File :
Save the values into a file.
Close :
Close the program.
4
.1.3.2. Advanced Setup
Pic.115 CardPrinterSetup – Laminator Advanced Setup
①
It shows total laminating count.
①
②
③
