VAC-2000UHD / 4000UHD User’s Guide
19
8.2 Setting input and output (Setting menu)
8.2.1 [ F01 to F03 ] Copying EDID
Note:
“[ ]” shows each menu number in this chapter.
EDID of sink devices can be read and stored, and the copied EDID can apply in the same way of internal
EDID.
Registering EDID:
1. Save the sink device EDID to a Copy Data (1 to 3): Menu number [F01 to F03]
2. Select the copy data you want to use: Menu number [F14]
3. Select the Copy EDID: Menu number [F10]
[Fig. 8.1] Copying EDID (VAC-4000UHD)
Menu numbers
F01 to F03: Copied data 1 to 3
Setting values
01 to 02:OUT1 to OUT2 (VAC-2000UHD) [Default] OUT1
01 to 04:OUT1 to OUT4 (VAC-4000UHD) [Default] OUT1
Note:
If cascade connection is employed, the source device will read the EDID of the source-device-side VAC. If
two or more distributors are connected between a sink device and source device, follow the procedure below
to read EDID data.
1. Copy the EDID of the sink device into the sink-device-side VAC and set it as “Copied EDID” or
“EXTERNAL (External EDID)”.
2. Copy the EDID of the sink-device-side VAC into the source-device-side VAC and set it as
“Copied EDID” or “EXTERNAL (External EDID)”.
Projector
VAC-4000UHD
(Sink device side)
VAC-2000UHD
(Source device side)
Laptop
ON
OFF
－
＋
MENU
SET
POWER
SIGNAL
KEY LOCK
VAC-4000UHD
DISTRIBUTIO N AMPLIFIER for HDMI
ON
OFF
－
＋
MENU
SET
POWER
SIGNAL
KEY LOCK
VAC-2000UHD
DISTRIBUTIO N AMPLIFIER for HDMI
[Fig. 8.2] Reading EDID in cascade connection
to
OUT 1
OUT 4
LC monitor
Copied data 1
Copied data 2
Copied data 3
Copied EDID
EXTERNAL EDID
Internal EDID
Blu-ray disc player
Step 1
Step 2
Step 3
