NJR-TW01UHD/NJR-RW01UHD User Guide
54
10 Product specification
Item
NJR-TW01UHD (Encoder)
NJR-RW01UHD (Decoder)
Input
1 input
HDMI (*1)/DVI 1.0
TMDS single link
HDCP 1.4/2.2, HDR (*2)
EDID emulation
Connector: Neutrik’s female HDMI Type A (19-pin) (*3)
1 input
Digital signal for extension
Format: IP-NINJAR protocol
RS-232C, LAN
Connector: Neutrik’s LC (opticalCON DUO series)
Output
1 output
Digital signal for extension
Format: IP-NINJAR protocol
RS-232C, LAN
Connector: Neutrik’s LC (opticalCON DUO series)
1 output
HDMI (*1)/DVI 1.0
TMDS single link
HDCP 1.4/2.2, HDR (*2)
Connector: Neutrik’s female HDMI Type A (19-pin) (*3)
1 output for monitoring input signals
HDMI (*1)/DVI 1.0
TMDS single link
HDCP 1.4/2.2, HDR (*2)
Connector: Neutrik’s female HDMI Type A (19-pin) (*3)
Format
VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) /
WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA / QWXGA / 4K (*4)
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
Color depth
24 bit, 30 bit, 36 bit Deep Color (*5)
Dot clock
25 MHz to 600 MHz
TMDS clock
25 MHz to 300 MHz
TMDS data rate
0.75 Gbps to 18 Gbps
Digital audio input
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz
Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
－
Digital audio output
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz
Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz
Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Analog audio output
1 output
Stereo LR balanced
Output impedance: 100 Ω balanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: Neutrik’s 2 female XLR (3-pin)
1 output
Stereo LR balanced
Output impedance: 100 Ω balanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: Neutrik’s 2 female XLR (3-pin)
Cable for
extension
Polishing (*6)
For multimode : PC polishing (recommended)
For singlemode : UPC polishing (recommended), SPC *APC is not supported
Transmission
distances (*7)
Multimode fiber (OM3) : Up to 984 ft. (300 m)
Singlemode fiber (OS1) : Up to 6.21 mi. (10 km)
Singlemode fiber (OS1) : Up to 24.85 mi. (40 km, optional)
External
control
RS-232C
1 port for RS-232C supported model
Neutrik’s male D-sub (9 pin) connector
Full duplex, up to 115.2 kbps
1 port
Neutrik’s male D-sub (9 pin) connector
Full duplex, up to 115.2 kbps
LAN
1 port for LAN supported model
Neutrik’s RJ-45
(etherCON type)
10Base-T/100Base-TX/1000Base-T (Auto Negotiation),
Auto MDI/MDI-X
1 port
Neutrik’s RJ-45
(etherCON type)
10Base-T/100Base-TX/1000Base-T (Auto Negotiation),
Auto MDI / MDI-X
Function
DDC buffer, Connection Reset
General
Power
100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
Neutrik’s powerCON type
Power
consumption
About 18 Watts
About 17 Watts
Dimensions
8.5 (W) × 1.7 (H) × 11.4 (D)” (216 (W) × 44 (H) × 290 (D) mm)
(Almost equivalent to half rack wide, 1U high) (Excluding connectors and the like)
Weight
4.6 lbs. (2.1 kg)
4.6 lbs. (2.1 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
x.v.Color, 3D, ARC, HEC, and CEC are not supported.
*2
HDR is supported if the connected sink device supports HDR and its copied EDID is set for EDID setting.
*3
Use the following HDMI cables:
・
1080p@60 : High-speed HDMI cable (16 ft.(5 m) or shorter)
・
4K@60 : Premium HDMI cable (10 ft. (3 m) or shorter)
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*4
4K format: 24 Hz/25 Hz/30 Hz/50 Hz (4:4:4)/59.94 Hz (4:4:4)/60 Hz (4:4:4) are supported.
*5
4K format: Only 24 bit is supported.
*6
We do not recommend other polishing methods because it increases the return loss.
*7
The maximum extension distance is measured under the following conditions: Fiber that is polished by a recommended method is used; there is no interconnection; it does not
exceed the allowable bending radius.
