IDK NJR-RW01UHD, Справочник по командам

Страница: 29 / 44

NJR-TW01UHD/NJR-RW01UHD Command Guide
29
@RME Copying EDID
Setting Command
@RME, device, ch, reserved, number
Response @RME, device, ch, reserved, number
Parameter device: Model
“1” fixed
ch: Input setting
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
reserved: Reservation
“1” fixed
number : Destination of the copied data to save
“0” fixed
Setting
example
Command
Response
@RME,1,1,1,0
@RME,1,1,1,0
Description Copying EDID of the sink device that is connected to the HDMI output connector of
the NJR-TW01UHD
Completed
Remarks The NJR-RW01UHD does not support this command.
@GWX / @SWX Selecting WXGA mode
Getting Command
@GWX, device, ch, port
Response @GWX, device, ch, port, mode
Setting Command @SWX, device, ch, port, mode
Response @SWX, device, ch, port, mode
Parameter device: Model
“1” fixed
ch: Input setting
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
port: Input connector
“1” fixed
mode: Selecting WXGA mode
0 = 1360x768 [Default], 1 = 1366x768
Getting
example
Command
Response
@GWX,1,1,1
@GWX,1,1,1,0
Description Getting the WXGA mode of Channel 1
1360x768
Setting
example
Command
Response
@SWX,1,1,1,0
@SWX,1,1,1,0
Description Setting the WXGA mode of Channel 1 to 1360x768
Completed
Remarks The NJR-RW01UHD does not support this command.