IDK MSD-804FD Series Скачать руководство пользователя страница 118

Страница: 118 / 233

MSD-804FD

User’s Guide

118

7.8.8

Audio output connector [OUTPUT CONNECTOR]

You can select audio output connectors.

For digital output, the settings of HDMI output connector and HDBaseT output connector are common. If you

want to set them separately, set the audio output connector in

“

7.8.9 Digital audio output connector

[DIGITAL OUTPUT]

”.

･

Only analog audio output connector: ANALOG

･

Only digital output connector: DIGITAL

･

Both analog audio output and digital output connectors: ANALOG&DIGITAL [Default]

Note:

If you set ”

7.7.2 Output mode [OUTPUT MODE]

“ to “DVI MODE”, no audio is output to any HDMI output

connector or HDBaseT output connector regardless of the setting of this menu.

1. To set the audio output connector using menu:

MSD-804FD

Top

↓

SET key

[FUNCTION SELECT]
AUDIO

▲▼

keys: Select “AUDIO”.

↓

SET key

[AUDIO]
OUTPUT CONNECTOR

▲▼

keys: Select “OUTPUT CONNECTOR”.

↓

SET key

[OUT1 AUDIO OUTPUT]

NALOG&DIGITAL

▲▼

keys: Select the desired audio output (ANALOG, DIGITAL, or

ANALOG&DIGITAL).

◄►keys: Select the desired output (OUT1 to OUT4).

↓

ESC key: Returns to the previous screen.

2. To set the audio output connector using commands:

@SDO: Set audio output connector

@GDO: Get audio output connector

For each output (common to OUTA

and OUTB)

Содержание MSD-804FD Series










































































































































































































































Результаты поиска

Содержание MSD-804FD Series

Отзывы:

IDK MSD-804FD Series, Руководство пользователя, Страница: 118 / 233

Результаты поиска

Содержание MSD-804FD Series

Отзывы: