MSD-54 SERIES User
’s Guide
212
8.15.1 Assigning functions [FUNCTION ASSIGN]
1. To assign functions to Tally output connectors using menu:
MSD-5404
Top
↓
SET key
[FUNCTION SELECT]
TALLY
▲▼
keys: Select “Tally”.
↓
SET key
[TALLY]
FUNCTION ASSIGN
▲▼
keys: Select “FUNCTION ASSIGN”.
↓
SET key
↑
ESC key: Cancels the setting and returns to the previous screen.
[TALLY PIN: 2]
O
UT1-IN1
▲▼
keys: Select the desired function for input pin 2.
*
◄►keys
[TALLY PIN:49]
N
OT USE
▲▼
keys: Select the desired function for input pin 49.
*
↓
SET key: Applies settings.
[TALLY FUNCTION]
NOW UPDATE...
Displays the message for 1 second before automatically returning to
the previous screen.
↓
[TALLY]
FUNCTION ASSIGN
* You cannot assign functions to the following pins, and they are not displayed: Pins1, 25, 26, and 50.
Note:
If you do not press the “SET” key, the assignment is not changed. Make sure to press the “SET” key.
2. To assign functions to Tally output connectors using commands:
@STE: Set function assignment of Tally output
@GTE Get function assignment of Tally output
