109
8.7.3 Synchronous signal output with no input video [SYNC OUTPUT]
You can set whether synchronous signals are output when no video signal is input from the selected input, or
when ”OFF” is selected for the input:
･
Not output: OFF
･
Output: ON: You can prevent the display device from being switched to the standby mode. [Default]
1. To enable/disable the synchronous output using menu:
MSD-5404
Top
↓
SET key
[FUNCTION SELECT]
OUTPUT SETTING
▲▼
keys: Select “OUTPUT SETTING”.
↓
SET key
[OUTPUT SETTING]
SYNC OUTPUT
▲▼
keys: Select “SYNC OUTPUT”.
↓
SET key
[OUT1 SYNC OUTPUT]
O
N
▲▼
keys: Select “OFF” or “ON”.
◄►keys: Select the desired output (OUT1 to OUT4).
↓
ESC key: Returns to the previous screen.
2. To enable/disable the synchronous output using commands:
@SUY: Set synchronous signal output with no input video
@GUY: Get synchronous signal output with no input video
For each output
