MSD-501/502/701/702 User
’s Guide
91
Error message
Error message
Error description
Browser
RS-232C/LAN
communication
FILE NAME INVALID
－
The file name was specified incorrectly.
FILE DATA INVALID
File format error
The MDS does not support this file.
FILE DATA SIZE OVER
File size error
The resolution exceeds the maximum resolution.
MEMORY ALLOCATE
ERROR
Memory allocate error
Enough memory to save the bitmap file temporarily
could not be allocated. You may solve this error by
rebooting the MSD and sending the bitmap file again.
－
Time out
Send bitmap data consecutively. If the interval is 2
seconds or longer, an error causes.
7.15.2 Outputting bitmap image
Menu Top
→
BITMAP
→
BITMAP OUTPUT
Setting for Each output (COMMON TO OUTA AND OUTB)
Setting value OFF [Default], ON
You can enable/disable the bitmap image output.
If several bitmaps are registered, select the bitmap number you want to output.
7.15.3 Background color
Menu Top
→
BITMAP
→
BACKGROUND COLOR
Setting for Each output/bitmap
Setting value R / G / B: 0 to 255 [Default]: R / G / B: 255 (white)
You can set the background color of bitmap.
If you set “LINK” to “ON”, you can set only Red (R). Settings of Green (G) and Blue (B) are also changed
according to the setting of the Red (R).