IDK MSD-501 Скачать руководство пользователя страница 24

Страница: 24 / 120

MSD-501/502/701/702 User

’s Guide

6.3 Menu operation

You can use the VFD screen and front panel keys to set each setting.

- Press the

“MENU/SET” key to apply the setting and to go to the next hierarchy.

- Press the

“ESC” key to go back to the previous screen.

- Use the

“

▲

” and “

▼

” keys to select channels and use the “

▲

” and “

▼

” keys to select the menu item.

In the setting screen, use

“

▲

”, “

▼

”, “

▲

” and “

▼

” keys to move the cursor and set the setting, and the set

value will be saved automatically after the operation. Available

“

▲

”, “

▼

”, “

▲

” and “

▼

” keys are displayed

on the right side of the screen. LEDs of available menu operation keys turn on.

【

See:

7.1Menu list

】

Top screen

Main menu

Setting

Sub menu

“MENU/SET” key

“ESC” key

MSD-702

①
①

[ V&A ]

MENU / SET

ESC

[Fig. 6.2] Menu hierarchy

・

Some setting screens, the set value is applied from the

“

MENU/SET

” key. When the “

MENU/SET

” key blinks,

press the key to apply the set value, and then the key will turn on (not blinking any more).

・

We have the cover for menu operation keys to prevent accidental operations. Please contact us as needed.

Note:

Do not turn off the MSD while

“

NOW SAVING

” is displayed, otherwise, the setting information

may be lost.

Содержание MSD-501

























































































































Результаты поиска

Содержание MSD-501

Отзывы:

Похожие инструкции для MSD-501

Бренды по названию

Популярные бренды

IDK MSD-501, Руководство пользователя

Результаты поиска

Содержание MSD-501

Отзывы:

Похожие инструкции для MSD-501

Бренды по названию

Популярные бренды