IDK MSD-402 Скачать руководство пользователя страница 64

Страница: 64 / 120

MSD-402 User’s Guide

8.8.9 Deep Color

Menu OUTPUT SETTING

→

DEEP COLOR OUTPUT

Setting for Each output channel

Setting value 24-BIT COLOR [Default], 30-BIT COLOR

You can select the color depth of HDMI signal.

“30-BIT COLOR”: signal is output with “30-BIT COLOR” only if a sink device supporting Deep Color is

connected. If a sink device that does not support Deep Color is connected, signal is output with “24-BIT

COLOR” automatically. However, since the transmission clock of ”30-BIT COLOR” is faster than that of

“24-BIT COLOR”, noise may occur if a bad-quality cable or long cable is connected. In those cases, the noise

may be removed by selecting”24-BIT COLOR”.

8.8.10 CEC connection

Menu OUTPUT SETTING

→

CEC CONNECTION

Setting for Each output channel

Setting value

・

NOT CONNECTED [Default]

・

SELECTED CHANNEL

・

IN1 to IN4

You can set which I/O to be connected when a device supporting CEC is connected.

Notes:

- Using CEC may cause negative effects. If you do not use CEC, set this menu to

“

NOT CONNECTED.

”

If the

status of the sink devices connected to the HDMI output connector changes (such as being turned OFF

→

ON) or if the CEC connection changes, the EDID may also need to be changed (the MSD changes it

automatically) in order to update the address of the connected device. When the EDID is changed, the

source device stops outputting video temporarily. Note the following points to not make the EDID change at

the time of operation.

- CEC connection is a one-on-one basis; it cannot connect multiple inputs and outputs. If you set multiple

outputs to connect to the same input, only a smaller output number is connected preferentially and other

outputs are not connected.

8.8.11 HDCP re-authentication

Menu OUTPUT SETTING

→

HDCP AUTHENTICATION

Setting for Each output channel

If a sink device supporting HDCP is connected, HDCP is authorized automatically. You can re-authorize

HDCP manually using this menu (connection Reset is performed automatically, but it can be performed

manually using this menu). Click the “SET” button to open the dialog box and click the “OK” button to execute

the HDCP re-authentication.

Содержание MSD-402

























































































































Результаты поиска

Содержание MSD-402

Отзывы:

Похожие инструкции для MSD-402

Бренды по названию

Популярные бренды

IDK MSD-402, Руководство пользователя

Результаты поиска

Содержание MSD-402

Отзывы:

Похожие инструкции для MSD-402

Бренды по названию

Популярные бренды