IDK MSD-402, Справочник по командам

Страница: 67 / 85

MSD-402 Command Guide
67
3.3.11 Preset memory
@RCM Loading cross point memory
Function Setting
Format @RCM, memory
Return value @RCM, memory
Parameter memory: cross point memory
1 to 9
Example @RCM,1
@RCM,1
Loading video and audio channels of
cross point memory 1.
Completed normally.
Remarks
－
@SCM / @SEM Saving channels to cross point memory
Function Overwriting Saving settings other than channels set to
Not controlled in
“@GCM / @ECMEditing
cross point memory
”.
Format @SCM, memory (, name) @SEM, memory (, name)
Return value @SCM, memory (, name) @SEM, memory (, name)
Parameter memory: Cross point memory
1 to 9
name: Memory name
Up to 10 one-byte characters using 20 to 7D from ASCII codes.
If you do not specify memory name, only cross point settings are saved without
changing the current memory name.
Example @SCM,2
@SCM,2
Saving the current video and audio
channels to cross point memory 2 without
changing the memory name.
@SEM,2,PATTERN2
@SEM,2,PATTERN2
Saving the current video and audio
channels to cross point memory 2 with the
name of
“PATTERN2”. Output settings
that are set to Not Controlled are not
saved.
Completed normally.
Remarks The setting of
“
@GPI / @SPI PinP output (P.20)
” which is set when it is saved to the
cross point memory will be saved.