HDC-UHD Series User Guide
56
9.4.3 External EDID
You can set the output connector to be recalled when the EDID type is set to “EXTERNAL”.
Menu
F12 to F13: IN1 to IN2
WEB menu EDID SETTINGS
→
CH.FOR EXTERNAL MODE
Setting value
[Table 9.13] Setting values for External EDID
Setting
Front
WEB browser
OUT1 [Default]
01
OUT1
OUT2
02
OUT2
OUT3
03
OUT3
OUT4
04
OUT4
OUT5
05
OUT5
To use external EDID:
Step 1: Select the HDMI output connector to which the target sink device is connected.
Menu number [F12 to F13]
Step 2: Select “EXTERNAL (External EDID)”. Menu number [F10 to F11] (P.53)
to
OUT 1
OUT 2
LCD
Copied EDID
EXTERNAL (External EDID)
Blu-ray player
Built-in EDID
Step (1)
Step (2)
[Fig. 9.5] Registering External EDID (Example: HDC-TR121UHD)
Notes:
・
Before setting “Resolution” to “01” (EXTERNAL(External EDID)) in “
”, set this menu first
・
Set external EDID again in the following cases:
- A sink device is replaced while the HDC powered on.
- A setting of sink device is changed while the HDC powered on.