IDK HDC-TH200 Скачать руководство пользователя страница 38

Страница: 38 / 83

HDC-TH200 User Guide/Command Guide

8.4.4 [ F20 ] Deep Color

You can set the Deep Color (color depth) that is output from the source device.

Setting value

08 : 8 bit [Default]

10 : 10 bit

12 : 12 bit

Notes:

・

This setting is only for digital input EDID.

・

The setting will be applied only if one of 03 to 22 is selected for

“

8.4.2 [ F10 to F11 ] EDID resolution

”.

・

To output Deep Color, please set 10 bit or 12 bit in “

8.6.2 [ F70 ] Deep Color output

” and connect sink

devices which support Deep Color.

8.4.5 [ F22 ] PCM Audio

You can set the maximum sampling frequency of PCM Audio that is output from the source device.

Setting value

32 : 32 kHz

44 : 44.1 kHz

48 : 48 kHz [Default]

88 : 88.2 kHz

96 : 96 kHz

192 : 192 kHz

Notes:

・

This setting is only for digital input EDID.

・

The setting will be applied only if one of 03 to 22 is selected for “

8.4.2 [ F10 to F11 ] EDID resolution

”.

・

Depending on sink devices, there are audio format which are not supported on sink device. Please select

supported audio format and frequency.

Содержание HDC-TH200




















































































Результаты поиска

Содержание HDC-TH200

Отзывы:

Бренды по названию

Популярные бренды

IDK HDC-TH200, Руководство пользователя

Результаты поиска

Содержание HDC-TH200

Отзывы:

Бренды по названию

Популярные бренды