IDK HDC-RH221UHD, Справочник по командам

Страница: 33 / 63

HDC-UHD Series Command Guide
33
@G&S / @S&S RS-232C transmission mode
Getting Command @G&S
Response @G&S, mode
Setting Command @S&S, mode
Response @S&S, mode
Parameter mode: RS-232C transmission mode
0 = Command mode [Default],
1 = Transmission mode
Getting
example Command
Response
@G&S
@G&S,0
Description Getting the RS-232C transmission mode
Command mode
Setting
example Command
Response
@S&S,0
@S&S,0
Description Setting the RS-232C transmission mode to Command mode
Completed
Remarks -
@G&& / @S&& RS-232C sending channel
Getting Command @G&&
Response @G&&, ch_1 (,
･･･
, ch_4)
Setting Command @S&&, ch_1 (, ch_2,
･･･
)
Response @S&&, ch_1 (, ch_2,
･･･
)
Parameter ch_1 to ch_3: RS-232C sending channel
0 = ALL,
2 = OUT2,
3 = All outputs,
102 = IN2,
200 = RS-232C connector
[Default]: All channels are disabled.
Getting
example Command
Response @G&&
@G&&,2,102
Description Getting the RS-232C transmission channel
OUT2 and IN2
Setting
example Command
Response
@S&&,2,102
@S&&,2,102
Description Setting the OUT2 and IN2 to RS-232C transmission channel
Completed
Remarks If both “2” (OUT2) and “3” (All outputs) are set, “3” (All outputs) is applied.