HDC-TH100-D / HDC-RH100-D User’s Guide
17
6 Precautions
Before using HDC-TH100-D / HDC-RH100-D, follow the precautions and instructions below.
6.1 Installation
Follow the instructions below when installing HDC-TH100-D / HDC-RH100-D.
・
Do not place the HDC-TH100-D / HDC-RH100-D on another device directly.
・
Do not block vent holes. To provide adequate ventilation, maintain sufficient clearances around the
HDC-TH100-D / HDC-RH100-D (1.2 in. (30 mm) or more).
・
Do not install HDC-TH100-D / HDC-RH100-D in a closed space.
When placing them in an EIA rack-mount unit, prepare ventilating equipment to keep the ambient
temperature at 40 degrees C/104 degrees F or less. If inadequately vented, the life of parts may be
shortened and operation may be affected.
(Exception: Installing to IDK’s rack mounting RM-42HQ)
・
When you do not use an EIA rack-mount unit, maintain adequate clearances (1.2 in. (30 mm) or
more) as shown below.
Maintain adequate clearances (1.2 in. (30 mm) or more) as shown below.
[Fig. 6.1] Necessary clearances
6.1.1 Installing on wall or ceiling
You can install the HDC on a wall or ceiling using the optional mounting plate (FP-100).
