IDK FDX-S Series Скачать руководство пользователя страница 43

Страница: 43 / 117

FDX-S Series User Guide

9.3.4 Registering bitmap

To register bitmap file:

1. Select [SYSTEM SETTINGS] from [MENU].

2. Set [ADVANCED MENU] to [ON].

3. Select [BITMAP] > [SEND BITMAP] > [Browse

…].

4. Click the [SEND] button to register bitmap file to the bitmap memory.

5. A

message “Bitmap file has been saved.” appears if it is registered correctly.

An error message appears if registration fails.

【

See: 10.15 Bitmap

】

[Fig. 9.7] Registering bitmap

[Table 9.3] Error message

Message

Description

File Name is invalid.

The specified file name is not correct.

File Format Error is happened.

The FDX-S does not support this file.

File Size exceeds the capacity.

The file exceeds the maximum resolution.

Memory Allocation Error is

happened.

The memory for temporarily saving bitmap file could not be

reserved.

The error may possibly be solved by turning off the

“POWER”

switch, turning on the switch again, and sending the bitmap file

again.

Содержание FDX-S Series






















































































































Результаты поиска

Содержание FDX-S Series

Отзывы:

Похожие инструкции для FDX-S Series

Бренды по названию

Популярные бренды

IDK FDX-S Series, Руководство пользователя

Результаты поиска

Содержание FDX-S Series

Отзывы:

Похожие инструкции для FDX-S Series

Бренды по названию

Популярные бренды