FDX-S Series User Guide
34
9.2.2 Video switching
To output video by selecting an output channel from an input channel or vice versa:
1. Set [ADVANCED MENU] of [SYSTEM SETTINGS] to [ON].
2. Select
“MENU/ENTER” > [FUNCTION SELECT] > [SYSTEM SETTINGS] > [SELECT MODE].
3. Select the desired switching.
If no operation is performed for 60 seconds, the FDX-S becomes in energy-saving mode and the front
display goes back to the top page.
【
See: 10.16.7 Channel selection mode
【
See: 10.16.4 Displaying advanced menu
【
■
[SELECT MODE]: [INPUT]
→
[OUTPUT]):
Select an input channel and then output channel.
Example 1: Outputting IN1 video from OUT3
The selected output channel button flashes.
Example 2: Hiding OUT3 video
Input channels have been assigned .
No output board is installed.
The output channel that does not have output
board cannot be selected.
Video that is output from OUT3 is OFF.
FDX-S16U/FDX-S16