FDX-64 Users Guide
37
7.4.5 Output stable level [OUTPUT STB LEVEL]
If the video blinks at the time of video switching due to the characteristics of the sink device, set the output
stable level.
If you set this menu to the bigger level, the appropriate stability is kept to minimize blinks caused at the time of
video switching.
If you set this menu to the smaller, it decreases the stability and reduces the wait time at the time of video
switching.
Using menu
OUTPUT SETTING
→
OUTPUT STB LEVEL
For
Each output connector (OUT1 to OUT64, ALL)
Set value
1 to 64 [Default]: 1
Note:
Channels that do not have an output slot board cannot be selected in this menu.
7.4.6 Output wait [OUTPUT WAIT SELECT]
If the video is not output due to the characteristics of the sink device, set this menu to
“
ON
”
.
This setting applies to all output channels that switch video.
Using menu
OUTPUT SETTING
→
OUTPUT WAIT SELECT
Set value
OFF: With wait [Default]
ON: No wait: The waiting time can be reduced.
