FDX-64 Users Guide
11
2 Product outline
Caution:
The FDX-64 outputs continuous invisible light, which may be harmful to your eyes. Please follow the
following cautions.
● Do not look into the rear panel fiber optic cable connectors or into the fiber optic cables
themselves.
● Plug the attached dust caps into the optical transceivers when the fiber cable is unplugged.
FDX-64 has 64 inputs and 64 outputs. Since this HDMI/DVI Digital Matrix Switcher supports HDCP, video
whose copyright is protected, such as Blu-ray, can be input. HDMI signals can also be input via a conversion
cable.
Combining HDBaseT or optical I/O slot board that supports a long-distance extension enables simple
configurations around the matrix switcher.
The FDX has RS-232C and LAN as its communication ports for external control so that you can control each
setting remotely.
Video/Audio
matrix
switch
64IN-64OUT
FDX-64
inputs/ 1 slot board
４
Digital input slot board
inputs/ 1 slot board
４
HDBaseT input slot board
outputs/ 1 slot board
HDBaseT output slot board
４
outputs/ 1 slot board
Digital input slot board
４
Digital video/audio
for extension
HDBaseT
I/O slot board can be added by 4 inputs or 4 outputs.
Digital video/audio
for extension
HDBaseT
Max. extension
100 m/ 328.08 ft.
Receiver
EDID emulator
Input EQ
Transmitter
Max. extension
Output EQ
Digital video/audio
for extension
Optical fiber
Max. extension
Multimode fiber
OM3: 300 m/ 984.25 ft.
OM4: 1 km/ 3280.83 ft.
inputs/ 1 slot board
４
Optical input slot board
outputs/ 1 slot board
Optical output slot board
４
Transmitter
Receiver
EDID emulator
Singlemode fiber
OS1 4.7 km/
15419.95 ft.
Digital video/audio
for extension
Optical fiber
Max. extension
30 m/ 98.43 ft.
Max. extension
40 m/ 131.23 ft.
Up to outputs/ 16 slot boards
64
Up to inputs/ 16 slot boards
64
Digital video/audio
HDMI DVI
Digital video/audio
HDMI DVI
EDID emulator
100 m/ 328.08 ft.
Max. extension
Multimode fiber
OM3: 300 m/ 984.25 ft.
OM4: 1 km/ 3280.83 ft.
Singlemode fiber
OS1: 4.7 km/
15419.95 ft.
[Fig. 2.1] I/O diagram
● Digital input slot board (4 inputs)
Four DVI-I connectors are mounted that can input both HDMI (a conversion cable is needed) and DVI
signals.
● HDBaseT input slot board (4 inputs)
Four RJ-45 connectors are mounted that can extend digital (video/audio) signals up to 100 m/328.08 ft.
when the HDC-T series and FDX series are used together.
● Optical input slot board (4 inputs)
Up to four SFP (LC connector x 2) modules can be mounted. Digital signals can be extended up to 4.7
km/15419.95 ft. (singlemode fiber) when the OPF-TH1000 and FDX are used together.
● Digital output slot board (4 outputs)
Four DVI-I connectors that are mounted can output video and audio signals of the selected input
channel.
