FDX-32 Users Guide
41
8.4 [INPUT TIMING]
8.4.1 Horizontal starting position [INPUT H POSITION]
Using menu
INPUT TIMING
→
INPUT H POSITION
For
Each input
Set value
0
：
0 dot [default]
-100 to +100
：
-100 dots to +100 dots
【
NOTE
】
This menu can be selected if FDX has scan converter output slot boards.
8.4.2 Horizontal size [INPUT H SIZE]
Horizontal size can be adjusted between -100 dots and +100 dots.
If the set value is minus ( - ), the video image will be shown as reduced image to horizontal direction. If set
value is plus ( + ), the video image will be shown as enlarged image to horizontal direction.
Set value to “－”
the video is shown as reduced image.
Set value to “＋”
the video is shown as enlarged image.
[Fig. 8.5] Setting horizontal size
