FDX-08 User Guide
78
8.9.3 Editing preset memory [PRESET EDIT]
Menu
PRESET MEMORY → PRESET EDIT
Setting value
The first page
01 to 32 : The number of preset memory 1 to 32
*
[xxxxxxxxxx] : Preset memory name (up to 10 characters in ASCII code)
The second page
OUT1 to OUT8
: Selecting output channel
V: ---, 1 to 8, OFF : Setting input channel setting of the FDX [Default]
「
---
」
A: ---, 1 to 8, OFF : Setting Input channel setting of the MAU-1616 (optional) [Default]
「
---
」
*
If output boards are not mounted, output channel information will not be displayed. If input boards are not
mounted, you cannot set those channels.
If it is set to not controlling channels, “---” is displayed. When preset memory is loaded an output that is set to
“---” (not controlled) will not be switched.
All preset memories are set to “---” (not controlled) by default.
Output channel 1 = Input channel 1
Output channel 2 = Input channel 2
Output channel 3 = Input channel 3
Output channel 4 = Input channel 4
Output channel 7 = Input channel 7
Output channel 8 = Input channel 8
Current I/O channel status
Output channel 1 = Input channel 3
Output channel 2 = Not control (---)
Output channel 3 = Input channel 1
Output channel 4 = Not control (---)
Output channel 7 = Input channel 5
Output channel 8 = Not control (---)
Current settings of preset memory 1
Load
I/O channel status after
recalling preset memory
Output channel 1 = Input channel 3
Output channel 2 = Input channel 2
Output channel 3 = Input channel 1
Output channel 4 = Input channel 4
Output channel 7 = Input channel 5
Output channel 8 = Input channel 8
Setting is not changed.
[Fig. 8.11] Recalling editing preset memory
Notes:
・
Press the SET key to apply the setting.
・
Do not power off the FDX while “Saving” is displayed, otherwise the setting information may be lost.