FDX-08 User Guide
55
8.5.6 Blank color [OUTPUT BLANK COLOR]
Select “A” in the front panel to change the settings of “R” (leftmost), “G” and “B” relatively from the current
setting values.
Menu
OUTPUT TIMING
→ OUTPUT BLANK COLOR
Setting for
Each output connector (OUT1 to OUT8)
Setting value
0 [Default]
0 to 255
Note:
Only channels of scan converter output board can be selected in this menu.
8.5.7 Background color [OUTPUT BACKGROUND]
Select “A” in the front panel to change the settings of “R” (leftmost), “G” and “B” relatively from the current
setting values.
By moving the cursor position to each red, green, and blue, the contract can be changed individually.
Menu
OUTPUT TIMING
→ OUTPUT BACKGROUND
Setting for
Each output connector (OUT1 to OUT8)
Setting value
0 [Default]
0 to 255
Note:
Only channels of scan converter output board can be selected in this menu.