IDK FDX-08, Руководство пользователя, Страница: 33 / 102

FDX-08 User Guide
33
8 Menu
Menus are divided into the following groups:

NPUT SETTING

INPUT TIMING

OUTPUT SETTING

OUTPUT TIMING

AUDIO

EDID

COM PORT (RS-232C communication)

LAN

PRESET MEMORY

OTHERS
* These menus are available if scan converter output board is mounted.
8.1 Menu list
■ Input settings (INPUT SETTING)
■ Input timing settings (INPUT TIMING)
Menu Function Setting value For Default Page
INPUT EQUALIZER Input equalizer AUTO/OFF Each input AUTO 36
INPUT SIGNAL CHECK No-signal input monitoring OFF/3 to 15 [sec.] Each input 10 [sec.] 37
INPUT HDCP HDCP input enabled/disabled ENABLE/DISABLE Each input ENABLE 38
INPUT SDI AUDIO GR SDI input audio group PRI : 1 to 4
SEC : 1 to 4
Each input PRI : 1
SEC : 2 39
INPUT SDI 2HD SEL SDI Dual Stream input video STREAM 1/STREAM 2 Each input STREAM 1 40
Menu Function Setting value For Default Page
INPUT H POSITION Horizontal start position 0/-100 to +100 [dot] Each input
signal
0 [dot] 41
INPUT H SIZE Horizontal active area 0/-100 to +100 [dot] Each input
signal
0 [dot] 41
INPUT V POSITION Vertical start positon 0/-30 to +30 [line] Each input
signal
0 [line] 42
INPUT V SIZE Vertical active area 0/-30 to +30 [line] Each input
signal
0 [line] 43
INPUT ASPECT Input video aspect ratio AUTO/FULL/4:3/5:3/5:4/16:9/16:10/16:9 LT Each input
signal
AUTO 41
INPUT CONTRAST Input contrast R/G/B: 0 to 200 [%] Each input
signal
100 [%] 44
INPUT BRIGHTNESS Input brightness 80 to 120 [%] Each input
signal
100 [%] 45
INPUT GAMMA Input gamma 0.1 LOW MIN to 1.0 NORMAL to 3.0 HIGH MAX Each input
signal
1.0 NORMAL 45
INPUT FILTER Input sharpness -5 SOFT MIN to 0 NORMAL to 15 SHARP MAX Each input
signal
0 NORMAL 46
INPUT HUE Input HUE 0° to 359° Each input
signal
0° 46
INPUT SATURATION Input saturation 0 to 200 [%] Each input
signal
100 [%] 47