Part 2 - Configuration
31
Storage
Use this option to configure storage settings.
<RAID non-supported models>
<RAID supported models>
•
Type
: Indicates the type of the installed disk.
•
Capacity
: Indicates the disk’s capacity.
•
Format
: If the disk has been formatted, indicates
either
Record
or
Not Using
. If you have connected an
unformatted storage device, the Use As value will be
indicated as
Not Formatted
.
•
Information
: Indicates if the disk is being used for
recording purposes. Disks that were used in different
systems will show up as
Other
. Select
Information
to check the saved data’s time information or select
Delete
to erase the data.
•
Select
Format
to prepare the disk as a storage for
data recording.
•
Disks formatted with Use As set to
Not Using
will
not be used for data recording.
•
This DVR supports SATA2 HDDs.
Mirror
This function is not suppported on TR-4108 and TR-
4116 recorders.
The DVR suppports function that records the same data
on the two disks at the same time. Up to two Mirrors are
supported.
This function only works if the two internal hard disks
have the same capacity and model.
•
If you change the setup related to Mirror, you must
reboot the system.
•
A disk problem may cause mirroring to stop. The
separated disk can be used to reboot the system.
•
This function does not work properly if the
connected hard disk has been already used for
mirroring in other DVR.
•
No.:
Indicates the mirroring number.
•
Internal HDD:
Indicates the available disks for
mirroring.
•
Setup:
Configure detailed settings releated to Mirror.
–
Mirror:
Click
OK
to start mirroring. Once you start
mirroring (writing data on the two disks at the same
time between two disks), all existing data on the
two disks will be erased.
Once you start mirroring, all existing data on the two
disks will be erased.
–
Stop:
Once mirroring starts, you can stop it by
selecting
Stop
option.
