Part 2 - Configuration
32
About
•
User Agreement
: Click
Accept and Use
to agree to
retaining the device data, and use the service.
The above screen pops up when booting up.
Record Setup
Refer to the
for basic
information on using the Setup menus.
General
Configure general recording settings.
•
Recycle
: When the recording disks become full,
the system overwrites existing data with new data,
starting with the oldest first. If
Recycle
is disabled,
recording will simply stop when the recording disks
reach their maximum capacity.
•
Record Audio
: The camera will record audio along
with video.
•
Intelligent Codec
: Automatically lowers bitrate when
any motion is not detected.
The bitrate does not decrease when using intelligent
codec for pre-event recording.
•
Use H.265 Encoding
: Check to use H.265 codec, and
uncheck to use H.264 codec.
•
Event Record Dwell
: If linked recording is designated
as an event-triggered action, recording takes place for
the duration specified under this setting.
