Idis TR-2208 Скачать руководство пользователя страница 19

Страница: 19 / 74

Part 1 - Getting Started

Audio Recording

If the Record Audio option under Record Setup >
General has been enabled the camera will record audio
along with video. For more information, refer to the
Record Setup on page 32.

Check your local laws and regulations on making
audio recordings.

Video Recording Playback

You can play back video recordings by using mouse or
remote control.

•

The initial video playback point in Search mode is
the recording's last playback point or the end of the
recording data.

•

Audio playback of the selected recording is available
in full screen mode only.

•

Covert protection on cameras also applies to video
recording playback.

All Channel Playback

Press the Menu button while in Live mode.

Select the Search Mode icon and then select All
Channels.

The selected search mode will be initiated.

For more information on data search, refer to the Part 3 -
Search on page 56.

Triplex Playback

Press the Menu button while in Live mode.

Select the Search Mode icon and then select
Triplex.

The DVR supports the Triplex function: monitoring,
recording and playing back at the same time.

For more information on data search, refer to the Part 3 -
Search on page 56.

Remote Control Buttons during
Playback

Camera Button: Displays the selected recording in
full screen.

Zoom Button: Allows you to zoom in on a specific
area of the recording.

Layout Button: Cycle between PIP, 2x2, 1x5, 1x7, 3x3
modes.

Context Menu

While in Search mode, right-click on the mouse to access
the Context Menu.

•

Zoom: Zoom in.

•

Edit Group: Enter to the Edit Group mode in the split
screen layout.

Содержание TR-2208











































































Результаты поиска

Содержание TR-2208

Отзывы:

Похожие инструкции для TR-2208

Бренды по названию

Популярные бренды

Idis TR-2208, Руководство по эксплуатации

Результаты поиска

Содержание TR-2208

Отзывы:

Похожие инструкции для TR-2208

Бренды по названию

Популярные бренды