Idis ID391H Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 98

Idis ID391H Скачать руководство пользователя страница 20

User’s Manual

12

Network



Transmit Method

– Frame Rate, Image resolution:

Set the transmit speed and resolution of video to be transferred to remote system

from the DVR.  Transmit speed is the number of images transferred during one second.  The higher the transmit
speed is, the more images are transferred.  For example, 30 means 30 images will be transferred during one second,
and 5 means 5 images will be transferred during one second.  This is supported for analog cameras only.

– SSL:

Using the SSL function enhances the security of outgoing data from the DVR by using the SSL (Secure

Sockets Layer) protocol when connecting to the DVR remotely. When using the SSL function, the DVR cannot
be connected with a program or a system that does not support the SSL function. Selecting

Standard

does not

use the SSL protocol for video and audio data, selecting

High

uses the SSL protocol for all data.

NOTE:

The remote setup to the DVR will be released when changing the SSL setting.

NOTE:

Using the SSL function might cause congestion in the system receiving data from the DVR depending on

the security level.

NOTE:

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit

(

http://www.openssl.org/

).

«
...
18
19
20
21
22
...
»

Содержание ID391H



































































































Отзывы:

Нет отзывов