Part 2 - Configuration
69
●
Ignoring Interval:
The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
motion was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignoring interval setting does not affect the motion
detection recording.
–
Use Ignoring Time
: Select
Time Setup
to specify
the PIR detection ignore time. PIR detection will be
disabled during the specified time frame.
Video-Analytics
Event lists that occur through video analysis include
Motion, Tampering, PIR, TripZone and Auto Tracking
events.
Video-Analytics_Motion
●
No.
: Select which cameras to apply Motion Detection
to.
●
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
●
Zone
: Define the motion detection block.
