Part 2 - Configuration
68
●
Ignoring Interval:
The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
motion was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignoring interval setting does not affect the motion
detection recording.
●
Use Ignoring Time
: Select
Time Setup
to specify
the PIR detection ignore time. PIR detection will be
disabled during the specified time frame.
Video-Analytics
Event lists that occur through video analysis include
Motion, Tampering, TripZone, Auto Tracking, Loitering,
Line Crossing and Object Detection events.
Video-Analytics_Motion
●
No.
: Select which cameras to apply Motion Detection
to.
●
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
●
Zone
: Define the motion detection block.
Use the remote control’s arrow buttons to move the
block selection window up, down, left, and right. The
selection window consists of 8 blocks per row. Select/
deselect individual blocks using the
Camera
buttons.
You can use the mouse to drag the zone and then select,
clear, or reverse the selection.
From the zone selection screen, press the
button
on the remote control or right-click on the mouse to
open up the Zone Setup menu.
