Part 2 - Configuration
58
●
Uploade File: Select between CBF and MP4. When
you select CBF, the NVR will upload an event detected
video clip to the FTP site. When you select MP4, the
NVR will attach an event-detected image file to the
FTP site.
●
Site Information: Displays information for the FTP
site.
•
For the FTP notification to work properly, the related
settings should be configured as follows:
-
Network menu - NetFS tab - Use setting
- Event menu - Actions - EventUpload setting
•
When you delete an FTP site from the NetFS setup
screen in the Network menu, the FTP site in the
FTP setup screen in the Notification menu will be
deleted, too.
•
If many event occurs during a short period, the
images may not be uploaded to the FTP site.
•
The FTP notification is not supported for system
events.
•
If upload fails several times, the images or video
clips are deleted.
•
When the NVR boots, all images and video clips are
deleted even if they were not uploaded yet.
Device Setup
Refer to the Menu Use on page 27 for basic
information on using the Setup menus.
Alarm-Out
Click the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different Days of
the week.
Select icon to delete the schedule.
●
Dwell Time: Select a value between 5 secs and 15
mins as the alarm-out duration.
●
Title: Designate a name for the alarm-out.
●
Range: Change the schedule time frame.
●
Mode: Select Event, On, or Off.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
●
Channels: Configure alarm-out port and beep
settings.
