Part 2 - Configuration
40
Security
Use this option to configure security settings.
Use 2FA
Two-factor authentication (2FA) is a method of
confirming a user's claimed identity by utilizing a
combination of two different components.
In other words, it is a method of authenticating the
registered mobile devices such as mobile phones and
smartphones on NVR for security when proceeding
settings, search and upgrade.
When you click
Use 2FA
and
2FA Setup
buttons,
the following window will appear (
Registered
means
the time when the mobile device was registered).
If you click the + button at the bottom of the table, the
following message will appear and you can register the
2FA device.
•
2FA device registration is supported only via IDIS
Mobile app.
•
Only the administrator account user can configure
this option.
•
The maximum number of device that can be
registered is 16.
When the mobile device registration is complete, the
following message will appear. Click
Disable 2FA
at
the bottom left corner of the screen to deactivate 2FA
function via the email of an administrator user account.
To use email authentication, the FEN setup must be
configured. To use UPR function, the UPR file must be
saved in advance.
For more information on saving the UPR file, refer to
