Part 2 - Configuration
79
SMTP Setup
Select
SMTP Setup
at the bottom right corner of the
screen to configure an SMTP server.
1
Select the SMTP server
Type
.
2
Enter the
SMTP Server
’s IP address or domain name
and then configure the
Port
and
Sender
settings.
Default SMTP server port number is
25
. Select
Test
to
send out a test mail using the current settings.
Select SS/TLS or STARTTLS, depending a method of
supporting a secure connection.
•
If you have configured the DNS Server setting under
Network - WAN
, you can enter the STMP server's
domain name instead of its IP address in the
SMTP
Server
field.
•
Address entered under
Sender
must be in the
correct email format and include the @ symbol.
If user authentication is required by the SMTP server,
select
Use
and then enter the
User
and
Password
information.
3
Select
OK
to apply and exit.
This product contains content developed by OpenSSL
Project for use in Open SSL Toolkit (http://www.
openssl.org/).
Push
Configure Push settings.
Select
Push
to use Push feature.
The Push feature sends out event-related messages to
mobile phone.
Enable to receive the event occured in NVR on the
mobile phone(Android, iOS). The NVR must be
registered and set in mobile phone.
