28
Menu Use
Information contained in this section (Menu Use)
applies to all other instructions found throughout Part
3 - Configuration.
Login with an ID that has permission to access the setup
menu is needed to access and make changes to the
Setup menu.
When using
Use 2FA
, you can access the setup
menu only after the mobile device on NVR must be
authenticated. For more information on 2FA function,
refer to the
.
1
While in Live mode, select Live menu > Setup using
the mouse.
1
2
3
4
5
6
7
8
9
0
1
System Setup
2
Camera Setup
3
Record Setup
4
Event Setup
5
Event Upload Setup
6
Device Setup
7
Network Setup
8
Notification Setup
9
Display Setup
0
Status Setup
2
Left-click on the option using the mouse.
3
Change the setting and then select
Apply
or
OK
to
save the change.
To apply default settings, select the Default button
located on the left bottom corner of the setup window.
Text Input via Virtual Keyboard
Click on the key using the mouse.
Toggle case.
Deletes the character to the left of the cursor.
Deletes the character to the right of the
cursor.
Converts keyboard.
Part 2 - Configuration
