Part 1 - Remote Setup
36
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
-
Move PTZ to
: Select a preset position to move the
pan/tilt driver to that position. Preset positions can
be set from the remote program.
Event Action
settings must be configured correctly in
order to perform event actions.
Motion Detection
Select
Motion Detection
to configure motion detection
event settings. With motion detection event enabled,
motion detections within the designated area will be
assumed as events.
•
Sensitivity
: Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
•
Minimum Blocks for Detection
: Select minimum
blocks for daytime and nighttime motion detection.
Motion must take place over the selected number
of blocks in order for it to be considered as a motion
detection event.
•
Motion Zone
: Click
Setup
and define the motion
zone using blocks.
-
(Draw)/ (Erase)
: Enable/disable motion
detection blocks.
-
(Cell)
: Select/unselect motion detection blocks
individually.
-
(Region)
: Select/unselect multiple motion
detection blocks.
-
(Fill)
: Select/unselect all motion detection blocks.
