Part 1 - Remote Setup
35
Event
Configure event detection settings.
Alarm In
Select
Alarm In
to enable alarm in event. With alarm
in event enabled, alarm in detections by the alarm in
connector will be assumed as events.
•
Title
:
Enter the alarm-in device’s name.
•
Type
:
Select the alarm in type.
•
Event Action
:
Select an alarm in event alert action.
-
Day & Night Mode
: Select if you do not wish to use
the IR cut filter when an event is detected. Select
this option to override the
Day & Night Mode
settings under
Video > Camera
. Select
B&W Mode
to enable black and white mode when an event
is detected. Expiration of the detected event will
disable B&W Mode and restore
IR Cut Filter
.
-
Alarm Out
:
Select if you wish to generate an alarm
out.
-
Send Email:
Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback:
Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm:
Select this option to generate an
audio alert and then choose an audio file (.wav).
