Idis DC-F1211, Руководство по эксплуатации

Страница: 25 / 42

Part 3 - Remote Setup
25
Streaming
• Primary/Secondary/Tertiary/Quaternary:
Multistreaming is supported. (priority: Primary >
Secondary > Tertiary > Quaternary). Enable/disable
streaming use. The lower stream settings may change
depending on higher stream settings. The tertiary and
quaternary streams may not be available depending
on higher stream settings (refer to the table below).
DC-F1111
Primary Secondary Tertiary Quaternary
Resolution ips Resolution ips Resolution ips Resolution ips
1280x720 30 1280x720 30 - - - -
DC-F1211
Primary Secondary Tertiary Quaternary
Resolution ips Resolution ips Resolution ips Resolution ips
1920x1080 30 1280x720 10 1280x720 1 - -
1920x1080 30 1280x720 10 352x240 10 - -
1920x1080 30 704x480 30 - - - -
1920x1080 30 704x480 15 704x480 15 - -
1920x1080 15 1920x1080 15 704x480 30 - -
1920x1080 15 1280x720 30 1280x720 15 - -
• Compression: Choose the streaming compression
method.
• Resolution: Choose a resolution setting for video
streaming. The resolution varies depending on the
camera model. The current stream resolution cannot
be higher than the higher stream resolution.
• Quality: Choose a quality setting for video streaming.
• Bitrate Control: Choose a bitrate control mode for
H.264 compression.
- CBR (Fixed Bitrate): Maintains the current bitrate
regardless of motion change in the video.
- VBR (Variable Bitrate): Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
• Frame Rate: Choose a frame rate setting for video
streaming. The fame rate of the current stream cannot
be higher than the fame rate of the higher stream if
those stream resolutions are same.
• Default Record Stream: Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program.