Idis DC-D4223RX, Руководство по установке

Страница: 13 / 26

Part 1 – Introduction
13
Factory Reset
Only use the factory reset button to restore the camera
to its factory default settings.
A factory reset will clear all camera settings configured
by the user.
1
Shut off the power supply.
2
Remove the dome cover and then press the reset
button down.
3
Hold the button down and reconnect the power
adapter.
4
Once the device turns back on, wait 5 seconds, and
then release the reset button.
5
The device will go through the resetting process and
reboot. All camera settings will be restored to their
factory defaults after the reboot.
It's also possible to do a factory reset by pressing and
releasing the reset button while the camera is turned
on or using the IDIS Discovery program from a remote
location. A factory reset will reboot the system. For more
information on factory reset, refer to the
IDIS Discovery
operation manual .
Lens
Motorized focus and zoom lens
Variable focus auto iris lens
When installing or handling the camera, be careful not
to give an impact on the lens to prevent a malfunction
from occurring.
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective
installation
manuals .
Product color and design may vary depending on the
model.
Removing the Dome Cover
DC-D4233RX, DC-D4223RX
1
Turn the dome cover counterclockwise.