Idis DA-ES1104 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 23

Idis DA-ES1104 Скачать руководство пользователя страница 7

7

Product Features

This product is a 19-inch, rack-mount Serial ATA (SATA) external storage device, offering easy cabinet installation
with a Network Video Recorder (NVR) and excellent space savings with support for up to four SATA hard drives. It also
provides RAID (Redundant Array of Independent Disks) support for improved data stability and performance. Key
features include:

•

19-inch rack-mount type

•

Best combination with DirectIP™ NVR

•

SATA to SATA Port Multiplier

•

Up to 3.0 Gbps data transfer rate (SATA II)

•

Up to four SATA hard drives

•

Enhanced data stability and performance with various levels of RAID support (0, 1+0, 5)

•

Error warning using audio and LED indicators

•

Mute button for turning off audio warnings

•

Easy scalability

Accessories

Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included.

•

eSATA external storage device

•

AC power cable

•

eSATA cable

•

Manual

•

Screws for installing hard drives

The screws for installing hard drives are not provided separately if hard drives are already installed in the unit.

Part 1 – Introduction

«
...
5
6
7
8
9
...
»

Содержание DA-ES1104
























Отзывы:

Нет отзывов