iDirect iQ LTE Series, Инструкция по установке, поддержке и обслуживанию

Страница: 65 / 70

Installation, Support, and Maintenance Guide 51
iQ LTE Satellite Router
Appendix E iQ LTE Satellite
Router Reset
The iQ LTE Satellite Router has two types of reset functions: Level 0, and Level 1. Each type
has a different effect on the router. Contact the iDirect TAC center for more information.
E.1 Level 0 Reset
Level 0 reset provides a basic reset function with the following features:
•
Initiated by:
• Router powering up
• Briefly pressing the reset button for 10 seconds or less. See Section 3.3, iQ LTE
Satellite Router Rear Panel Descriptions on page 15 for the reset button location
• In the user interface, select the Administration > Software and Configuration >
Reboot Terminal
• Used to boot to a newly-loaded software image and configuration
• Recovery: initiate a Level 0 reset
E.2 Level 1 Reset
Level 1 reset provides a means of returning the router to factory default settings.
Level 1 reset features:
•
Initiated by: Pressing the reset button and keeping it pressed for more than 10 seconds,
see
Section 3.3, iQ LTE Satellite Router Rear Panel Descriptions on page 15 for the reset
button location
• Intended for recovery of the remote only, and new options file, configuration, and
software must be loaded
NOTE: Refer to the Terminal WUI User Guide for more information. It is good
practice to clear browser history, and turn off Web page caching, before accessing
the user interface.
NOTE: This reset must not be used unless there is an intent to reconfigure or
reload the software and options. There is no recovery once this reset occurs. New
options file, software, and configuration must be loaded using the Terminal WUI
once this reset has been initiated.