iDirect iQ LTE Series, Инструкция по установке, поддержке и обслуживанию

Страница: 44 / 70

30 Installation, Support, and Maintenance Guide
iQ LTE Satellite Router
Maintaining the iQ LTE Satellite Router
5.2 Maintaining the iQ LTE Satellite Router
The iQ LTE Satellite Router requires basic maintenance to keep it running efficiently and to
prolong its life.
5.2.1 Temperature Control
The iQ LTE Satellite Router has a built-in temperature sensor which measures the actual
circuit board and LTE module temperature. If the board temperature exceeds a defined
threshold, the iQ LTE Satellite Router PCB shuts down and allows the unit to cool before
restarting. See
Table 2-1 on page 5 , for the proper temperature range.
Elevated internal temperature may be caused by:
•
Objects blocking the vent
• Dust accumulated on the enclosure or the vent
• Ambient temperature elevated over the specified limits 90 Day Regular Maintenance
5.2.2 90 day maintenance
Typically, the only maintenance needed to be performed on the unit, is to maintain the
temperature of the iQ LTE Satellite Router and keep its external areas free from moisture,
dust or dirt, which are included in a 90-day maintenance cycle.
Perform the following procedures every 90 days:
•
Keep the staging area clear and free of dust during and after installation
• Make sure that no objects are blocking the vents
• If there are objects blocking the vents, remove them safely so there is at least 6 inches
(15 cm) from the unit
• Make sure that no dust has accumulated on the enclosure or the vent. If dust has
accumulated use a soft brush to remove dust
• Make sure that the ambient temperature remains within the specified limits
WARNING: This unit is not serviceable. Return unit to provider for all servicing
issues.
ATTENTION : Cette unité n’est pas réparable sur site. Renvoyer au fournisseur
pour tout réparation.