Operator Manual ilex with IPS500A
L280-0688 REV C
Large Monitor Cleaning FSN monitors only
Products FM-C5501DV, FM-A5502DC, FM-D5801DV.
Precautions
•
Before cleaning, switch the display in stand-by position to prevent the control touch panel
from being activated inadvertently by sweeping over the front filter. In stand-by position
the touch panel cannot be activated by just sweeping over them. To switch the display on
again, you must press the stand-by key again.
•
Take care not to damage or scratch the front filter or LCD panel.
•
Be careful with rings or other jewelry that can touch the front filter
•
Do not apply pressure on the front filter or LCD panel.
•
Do not apply or spray liquid directly to the front filter, panel or cabinet as excess liquid
may cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth.
•
Follow your hospital protocol for the handling of blood and body fluids.
•
The display is not disinfected or packed in sterile environment.
•
Follow your hospital protocol in case the display needs to be disinfected prior to
installation.
•
Front Filter
•
Proceed as follows:
o
1. Remove dust with a dry, lint-free, non-abrasive soft cotton cloth.
o
2. Remove fingerprints or grease using a lint-free, non-abrasive soft cotton cloth
that is lightly moistened with plain water or a mild commercial glass cleaning
product suited for coated glass surfaces.
o
3. Gently wipe dry with a dry cloth.
•
The following products are tested and approved:
•
Misty Clear Lemon 10 Disinfectant
•
Bohle glass cleaner
•
Zep Heavy-duty glass & all surface cleaner
•
Klear Screen
•
Screen TFT (Kontakt Chemie)
•
Incidin Foam (Ecolab)
•
Microzid
•
Mild detergent
•
Isopropyl alcohol with concentration < 5%
•
Household bleach (generic sodium hypochlorite, solutions of 5.25% sodium hypochlorite
diluted with water between 1:10 and 1:100)
