Operator Manual ilex with IPS500A
L280-0688 REV C
Moving and Positioning
Center Lock Pedal
Caster Modes:
Total Lock: Step down on the right end of the caster brake pedal with the red dot to lock both
the swivel and roll. Put the casters in this mode during use to prevent any horizontal movement
of the unit.
Free Float: Position the pedal so that it is horizontal which will allow the casters to swivel and
roll in any horizontal direction.
Steer Lock: Step down on the left end of the caster brake pedal with the green dot to lock the
direction of the two casters closest to the pedal making steering easier when relocating the unit.
Do NOT move cart over cords or uneven, soft or sloping
surfaces. Failure to comply may result in cart instability
leading to equipment damage or personal injury.
Use handles to move cart with an assistant to avoid collision
with other equipment and walls.
Casters must be in TOTAL LOCK while system is in use.
Move unit only with monitor fully lowered into transport
position.
Pedal Positions
Steer Float Lock
