Installation Guide ilex
L280-0974 REV C
Page 1
ilex controls
For details of ilex cart and monitor controls, please refer to Operator Manual L280-0975.
Video Inputs
The ilex has 4 different channel input capabilities
Video inputs are connected to the rear of the ilex then routed scalers and into the controller, the MSV2
(Multiview scalar). Basic Layout navigation is done in the “Guest” mode of the system. Changing or
programing of the layout format is available only in the “Administrator” mode.
Video Panel on rear of ilex
Channel 1 inputs: DVI, VGA, or S-Video
Channel 2 inputs: DVI, or VGA or SDI(using DVI to DVI jumper from SDI panel)
Channel 3 inputs: DVI, DisplayPort, or SOG
Channel 4 inputs: DVI, DisplayPort, or SOG
