Operator Manual Aspect 100UC Plus
L100-3065 REV C
CONTROLLER CONNECTIONS
B
A
5
4
3
1
2
BATTERY FUNCTION
When the AC power cord is plugged into the wall, the battery will be
charging until the battery reaches full capacity. When it does, the
charging will taper off. If the power at the outlet goes out, or the power
cord is unplugged, the table will automatically switch to battery back-up
mode.
Local procedures may be in place for proper disposal or recycling.
For more information about batteries, such as battery life,
production codes and
disposal go to the Linak web site for disposal
information. Select “Products|User Manuals” and click on “Actuators
& Electronics”. Linak documentation can be found at their web site:
PORT
DEVICE
1
TREND ACTUATOR
2
ELEVATING ACTUATOR
3
SLIDE ACTUATOR
4
LATERAL ACTUATOR
5
LEVEL SWITCH
A
HAND & FOOT CONTROLS
Pull tab to access input fuses and spares
(use forceps to pull out spares)
