Operator Manual
Aspect 100-4T and ISR
L100-2843 Rev. E
21
9.3.
Preparation for Performing CPR
•
Return table to level position, retract tabletop to minimize overhang
and lower table position to a comfortable height before performing
CPR on a patient.
10.
STANDARD ACCESSORIES
10.1.
Patient Mattress Pad for Tabletop.
The Patient Mattress Pad is held in place by hook and loop fasteners. To remove the pad, simply
pull pad up gently to remove. Replacement pads are supplied with new self-adhesive fasteners
installed and new adhesive backed mating pieces for the tabletop. Peel off old fasteners from
tabletop and install new pad.
Note: Pad complies with California Technical Bulletin 117.